BEHRINGER XENYX 1202 COMPATIBLE POWER SUPPLY INFORMATION

Behringer Xenyx 1202 Compatible Power Supply Information

Behringer Xenyx 1202 Compatible Power Supply Information

Blog Article

Behringer Xenyx 1202 Compatible Power Supply Information


The Behringer Xenyx 1202 is a popular compact audio mixer used in studios, live sound, and broadcasting. One crucial aspect of maintaining your mixer’s performance and longevity is ensuring it has a proper and compatible power supply. Using the correct power adapter not only guarantees safe operation but also prevents damage to the mixer’s internal components. Behringer XENYX 1202 Power Supply


This guide provides comprehensive information about the power requirements of the Behringer Xenyx 1202 and helps you identify compatible power supplies and alternatives if needed.






1. Official Power Supply Specifications


The Behringer Xenyx 1202 typically uses an external power adapter, which is the safest and recommended method to power the device.



Standard Power Adapter Specs:




  • Input Voltage: 100-240V AC, 50/60 Hz (worldwide compatible)




  • Output Voltage: 12V DC




  • Output Current: Typically 500mA to 1A (check exact model)




  • Polarity: Center negative or center positive (very important to verify)




  • Connector Type: Barrel plug (usually 5.5mm outer diameter, 2.1mm or 2.5mm inner diameter)




Note: The exact power adapter model supplied with your mixer may vary depending on your country or purchase date, so always refer to the label on your original adapter or the information printed on the mixer’s rear panel.






2. Verifying Polarity and Voltage


Polarity


One of the most critical factors in choosing a compatible power supply is the polarity of the DC connector. The mixer’s manual or rear panel usually indicates the polarity symbol. The symbol looks like this:





  • A circle with + and – signs and a line showing which part of the plug is positive or negative.




For example:




lua






( —●---+ )


This means the center pin is negative and the outer barrel is positive, or vice versa.


Using a power adapter with incorrect polarity can permanently damage your mixer. Always confirm polarity before plugging in any third-party power supply.






3. Voltage and Current Requirements




  • The Xenyx 1202 requires 12 volts DC power.




  • Current rating should be at least 500mA (0.5A), but having a power supply with a higher current rating (e.g., 1A) is fine because the mixer will only draw the current it needs.




  • Never use a power adapter with a voltage rating higher than 12V, as this can damage internal circuits.







4. Using Third-Party Power Supplies


If you need to replace your original power adapter, here are key guidelines for selecting a third-party compatible supply:





  • Voltage: Must be 12V DC exactly.




  • Current: Equal to or greater than 0.5A (500mA).




  • Polarity: Must match the original (center positive or center negative).




  • Connector size: Should physically fit the mixer’s power input jack.




Many electronics stores sell universal adapters with selectable voltages and polarity. These can be a convenient option, but you must set them correctly before connecting.






5. Power Supply Models Commonly Used


While Behringer does not always specify the exact power adapter model, common compatible models include:





  • Behringer PSU-SB DC Adapter: This is a common 12V DC power supply compatible with many Behringer mixers.




  • Generic 12V 1A DC adapters: Widely available but must meet polarity and connector specs.




Always check your mixer’s label for exact requirements.






6. USB or Phantom Power Note


The Behringer Xenyx 1202 does not draw power via USB nor does it provide phantom power for microphones (requires a separate phantom power supply or mixer model). Phantom power requires additional circuitry and higher voltage (48V), so make sure your microphones and cables are compatible with your setup.






7. Safety and Maintenance Tips




  • Use only power supplies rated for audio equipment to reduce noise interference.




  • Avoid cheap or uncertified adapters that may cause hum or damage.




  • Regularly inspect your power adapter and cable for wear and tear.




  • If you notice unusual noises, overheating, or failure to power on, disconnect immediately and check the power supply.




  • Never attempt to open or repair the power adapter yourself.







8. Troubleshooting Power Supply Issues


































Symptom Possible Cause Solution
Mixer won’t power on Power supply unplugged or faulty Check connections and try a different power supply
Mixer powers on but no sound Faulty adapter causing voltage drop Replace adapter with proper specs
Excessive hum or noise Poor quality power adapter Use a high-quality, regulated power supply
Overheating adapter Incorrect voltage or overloaded Use correct voltage and rated current







Conclusion


The Behringer Xenyx 1202 requires a 12V DC power supply with the correct polarity and adequate current rating to function safely and effectively. Using the original or a verified compatible power adapter ensures reliable performance and protects your mixer from damage.


Always verify voltage, current, polarity, and connector type before purchasing or using a third-party adapter. Maintaining a good power supply will keep your mixer running smoothly, delivering the professional audio quality you expect.


If you lose your original adapter or need a replacement, carefully match these specs or consult with Behringer support or authorized dealers.

Report this page